Renesas M3A-7512SA Manuel d'utilisateur

Regarding the change of names mentioned in the document, such as Mitsubishi Electric and Mitsubishi XX, to Renesas Technology Corp.The semiconductor o

Board M3A-7512SA - 5 - // About Keyboard * Switch jumpers according to scan/return line assignment to ports. Keyboard Connector Scroll

Board M3A-7512SA - 6 - // Jumper Switch *S1: Scan-line/Return-line Select switch -23 Return line -12 Scan line -23 Return-line -12 Scan-line 1

Board M3A-7512SA - 7 - *S7: PS/2 signal-line/LED select switch -23 LED-line -12 PS/2 signal-line -23 LED -12 PS/2 signal-line 1 2 3 1 2

Board M3A-7512SA - 8 - // Keyboard Signal Test Pins Return6: Return-line 6 Return5: Return-line 5 Return4: Return-line 4 Re

Board M3A-7512SA - 9 - // Keyboard Connector Return-line 0 (P00) Return-line 2 (P02) Return-line 4 (P04) Return-line 6 (P06) R

Board M3A-7512SA - 10 - // System Diagram 16 Key Matrix 8 LED Output P00-P07 P12-P16 P20-P27 P33-P36 USBVREFOUT P10/D- P11/D+ P30-P32 3 1.5kΩ USB

Board M3A-7512SA - 11 - // Appendix // Diagram * 7536 Group 42 Pin SDIP package Diagram is shown below.

Board M3A-7512SA - 12 - // Part Table * 7536 Group 42 Pin SDIP Package Part Table is shown below. * Check part numbers in the diagram and on the sil

All rights reserved; no part of this publication may be reproduced or transmitted by any means, electronic, mechanical, photocopying or otherwise, wi

MSD-7512-U 7536/7534 Group HID Class Keyboard Evaluation Board M3A-7512SA Instruction Manual Ver.1.00 ‘01-4-24 MITSUBISHI ELECTRIC

Keep safety first in your circuit designs! * Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products better an

Revision History M3A-7512SA Instruction Manual Ver.No. Data Changes 1.0 2001.4.24 The First Revision

// Contents // // Overview _________________________________________________________________1 // Board Explanation __________________________

Board M3A-7512SA - 1 - // Overview * USB function of MITSUBISHI Low Speed USB Microcomputer 7536 Group/7534 Group can be evaluated on the Board. (for

Board M3A-7512SA - 2 - // Power Supply * Supply power to the USB Port with a USB cable which is attached to a PC. * Insert 1.5kΩ resistance between

Board M3A-7512SA - 3 - // Oscillation Circuit * Build Oscillation Circuit on the foot pattern. // Bypass Condenser * Insert a bypass condenser be

Board M3A-7512SA - 4 - // Chip Package * Use a 1.778mm pitch 42 pin SDIP (42P4B) IC socket. For evaluating with a debugger, use M37536RSS. Or M37534