Renesas H8S/2168 Manuel d'utilisateur télécharger pdf (Page 15)

Fasten the user system interface cable head to the IC socket for a TFP-144 package on the user

system with the four screws (M2.0 × 10 mm) provided. Each screw should be tightened a little at a

time, alternating between screws on opposing corners. Take special care, such as manually securing

the IC socket soldered area, to prevent the soldered IC socket from being damaged by

overtightening the screws or twisting the components.

Pin 1

Cable head

IC socket

(NQPACK144SE

manufactured by

Tokyo Eletech Corporation)

Screws (M2.0 x 10 mm)

User system

Figure 5 Connecting User System Interface Cable to User System

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Pas de commentaire

Renesas H8S/2168 Manuel d'utilisateur Page 15