Renesas H8SX/1658R Manuel d'utilisateur télécharger pdf (Page 30)

Section 2 Connection Procedures

Rev. 2.00 Sep. 08, 2008 Page 14 of 30

REJ10J1868-0200

2.7 Using the Emulator without Connecting User System

WARNING

Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE BOARD

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are correctly

aligned. Failure to do so will result in a FIRE HAZARD and

will damage the user system and the emulator product or

will result in PERSONAL INJURY. The USER PROGRAM will

be LOST.

CAUTION

When this emulator is used without connecting to the

user system, ensure that the SW1 jumper pin is inserted to

[USER-OFF]. Failure to do so will damage the emulator

product, user system interface board, and user system.

Attach the provided spacers (2.6MQ x 13 mm) to four positions on the user system interface board

not to apply loads to the connector (CN1) on the board.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Pas de commentaire

Renesas H8SX/1658R Manuel d'utilisateur Page 30