Renesas M16C/26A Manuel d'utilisateur

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

Chapter 5. Building the Tutorial Project The tutorial project build settings have been pre-configured in the tool-chain options. To view the tool ch

5.2. Connecting the debugger For this tutorial it is not necessary to provide an external power supply to the board. The power will be obtained from

• Select FF000 for the Firmware location for the program. It is recommended that the E8a firmware location is towards the top of the memory map. •

Chapter 6. Downloading and Running the Tutorial Once the code has been built in High-performance Embedded Workshop it needs to be downloaded to the

• Place a breakpoint at the call to main(); Breakpoints can only be set when the E8a is connected to the target and the module is downloaded. Breakp

• Right click on the FlashLEDs(); function and select ‘Go to cursor’. The code will execute to the selected line and stop. An automatic breakpoint

• Press <Stop> on the debug tool bar. • Press ‘CTRL-B’ to open the breakpoint window. This dialog is not available if user debugged using e

When the program stops you can see the modified string displayed on the second line of the LCD. Inspection of the watch pane will show that the first

Chapter 7. Project Files 7.1. Standard Project Files The Renesas Starter Kit tutorials are configured so that it is possible to provide the same tut

15 7.1.2.Board initialisation code (hwsetup.c / hwsetup.h) There are four common stages to the configuration of the microcontroller device. The code

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

7.1.3. Main tutorial code (main.c / main.h) The main tutorial code is common to all tutorial projects. The display initialisation and string display

Chapter 8. Additional Information For details on how to use High-performance Embedded Workshop, refer to the High-performance Embedded Workshop manu

Renesas Starter Kit for M16C/26A Tutorial Manual Publication Date Rev.4.00 Oct.22, 2007 Published by: Renesas Techn

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit for M16C/26AREG10J0041-0400Tutorial Manual

Renesas Starter Kit for M16C/26ATutorial ManualUser’s ManualRev.4.00 2007.10RENESAS 16-BIT SINGLE-CHIP MICROCOMPUTERM16C FAMILY / M16C/Tiny SERIES

ii Table of Contents Chapter 1. Preface...

Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of this d

Chapter 2. Introduction This manual is designed to answer, in tutorial form, the most common questions asked about using a Renesas Starter Kit: The

Chapter 3. Tutorial Project Workspace The workspace includes all of the files for two build configurations. The tutorial code is common to both the

Chapter 4. Project Workspace 4.1. Introduction High-performance Embedded Workshop is an integrated development tool that allows the user to write, c

The next dialog presents the three types of example projects available. 1. Tutorial: This is the one of interest at this time; the code will be expl