Renesas TFP-144 Manuel d'utilisateur télécharger pdf (Page 12)

Use the guide pins provided to determine where to install the IC socket, as shown in figure 3.

User system

IC socket

(NQPACK100SE

manufactured by

Tokyo Eletech Corporation)

Guide pins

4 projections to apply

epoxy resin adhesive to

Bottom view of IC socket

Pin 1

Figure 3 Location Setting of IC Socket

2.2.2 Soldering IC Socket

After fastening, solder the IC socket for a TFP-144 package to the user system.

CAUTION

Be sure to completely solder the leads so that the solder

slops gently over the leads and forms solder fillets. (Use

slightly more solder than the MCU.)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Pas de commentaire

Renesas TFP-144 Manuel d'utilisateur Page 12