REJ10J1589-0100
Rev.1.00 Jul.01.07
page
2 of 8
1 Notes
1.1 Line Assembly
Regardless of the Radix setting, the default for line assembly input is decimal. Specify H as the
radix for a hexadecimal input.
1.2 Event Setting
1. TAB order in Set Event Status dialog box
Even when you press [TAB] key, the next input control may not be focused on the Set Event
Status dialog boxes opened from H/W Break, Time Measurement, and Trace Point.
2. In-place-edit mode on event list
On event list in H/W Break, Time measurement and Trace Point, High-performance Embedded
Workshop will not escape from in-place-edit mode even when you press the [ESC] key.
3. Event setting by BIT SYMBOL
When the specified address is odd numbers, the setting by BIT SYMBOL can not set the
correct condition. Use DATA ACCESS setting and specify the compared data with the data
mask. For details about how to set the conditions for odd number addresses, refer to the online
help.
4. Event detection for BIT SYMBOL
When the event is set to detect the access to specified bit, it will be detected even if the other
bit of the same address as the specified bit is accessed. This is because the access to the bit
from MCU is byte access.
1.3 Data Trace
1. Split-bar behavior when double-clicking
If you double-click the split-bar, which divides view up and down, the horizontal scroll-bar,
vertical scroll-bar, and tabs in the upper view will vanish. Drag the split-bar to display them
again.
1.4 Trace
1. Specifying function in SRC mode
In the SRC mode, when you specify a function to display it, if the current displayed source file
includes the function, the top of the source file will be displayed.
2. Saving of tracing result in text
When you save a tracing result in text with only “BUS” and “DATA” buttons ON, the vertical
position of some headers will shifts from the corresponding data. Check “Tab Separated
Format” and open it with spreadsheet applications to display them correctly.
3. Loading the trace image file
Trace window can not load the trace image file saved by PDxx debuggers. And also, trace
window can not load the trace image file saved by the different target from the current target.
1.5 RAM Monitor
1. Proportional Fonts
When a proportional font is selected, a part of the characters in the view may be hidden. Fixed
fonts are recommended.
1.6 Memory
1. 8 bytes data operations
To set, fill, and copy 8 bytes data are not supported.
1.7 Script
1. Result of interactive command
When you invoke an interactive command, for example, Assemble and setMemoryByte, the
running dialog box will appear and may hide the view of the results.
2. SCOPE Command
When you refer current scope name with SCOPE command after program execution, the scope
(17 pages)
(106 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels