Renesas M38000TL2-FPD Informations techniques Page 31
- Page / 56
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
( 29 / 54 )
(3) Connecting the M38000TL2-PSW to the Target System
Connect the clips for RESET, GND and Vcc on the tip of the M38000TL2-FPD's three-color cables
to the RESET, GND and Vcc pins on the target system.
(1) Reset cable (white)
(2) GND cable (black)
(3) Vcc cable (yellow)
These three types of cables are connected differently depending on how the MCU type select switch
(SW1) is set. Table 3.2 lists the SW1 settings and the connection of the RESET, GND and Vcc cables.
Figures 3.11 and 3.12 show how to connect the cables.
Table 3.2 Connecting RESET, GND and Vcc cables
Figure 3.11 Connecting three cables when SW1 is set to RSS/RFS
Note: When SW1 is set to RSS/RFS, do not connect the Vcc cable.
Figure 3.12 Connecting three cables when SW1 is set to RLSS/RLFS
SW1 set to RSS/RFS
RESET (white)
Connect to the RESET
pin on the target system.
Connect to the RESET
pin on the target system.
GND (black) Vcc (yellow)
SW1 set to RLSS/RLFS
Connect to the GND pin. Not connected
Connect to the GND pin. Connect to the Vcc pin.
Black: GND
Yellow: Vcc
White: RESET
Black: GND
Yellow: Vcc
White: RESET
Do not connect the Vcc cable.
- To our customers 1
- M38000TL2-FPD 3
- ( 2 / 54 ) 4
- To use the product properly 5
- When using outside Japan 5
- Terminology 6
- Contents 7
- ( 6 / 54 ) 8
- ( 7 / 54 ) 9
- WARNING 10
- IMPORTANT 10
- CAUTION 10
- Warning for Installation: 11
- Warnings for Use Environment: 11
- ( 14 / 54 ) 16
- Chapter 2. Preparation 17
- 2.3 Name of Each Part 19
- (page 34) 20
- (page 22) 20
- Chapter 3. Setting Up 21
- Note on Connecting the Cable: 24
- Note on Securing the Screws: 24
- ( 23 / 54 ) 25
- ( 24 / 54 ) 26
- ( 25 / 54 ) 27
- ( 26 / 54 ) 28
- ( 27 / 54 ) 29
- ( 28 / 54 ) 30
- (4) LED Display 32
- Chapter 4. Usage 33
- ( 33 / 54 ) 35
- Note on Downloading Firmware: 36
- Note on the Self-check: 37
- ( 36 / 54 ) 38
- Chapter 5. Specifications 39
- 5.2 External Dimensions 41
- Chapter 6. Troubleshooting 43
- ( 45 / 54 ) 47
- 6.5 FAQs 49
- ( 48 / 54 ) 50
- ( 49 / 54 ) 51
- 7.1 Maintenance 52
- 7.2 Guarantee 52
- 7.3 Repair Provisions 52
- 7.4 How to Request for Repair 53
- ( 52 / 54 ) 54
- Rev.2.00 55
- November 1, 2003 55
- REJ10J0072-0200Z 55
- User’s Manual 56
Produits connexes et manuels pour Mise en réseau Renesas M38000TL2-FPD
(8 pages)Sennheiser Teléfonos manuales de usuario
Empezando en P
Commentaires sur ces manuels