Renesas MCU Board for PC4504 Emulator System M34570T-MCU Informations techniques télécharger pdf (Page 21)

( 19 / 34 )

4.5 Connection to the Target System

When connecting the M34570T-MCU board to the target system:

Use the 40-wire normal-pitch cable (included) to connect the 40-pin dual-in-line pins on the target

system. Following products are required for connection to the target system.

• 80-wire half-pitch cable (40cm)

• PCA4029 pitch converter board

• 40-wire normal-pitch cable (10cm)

Figure 4.7 depicts the M34570T-MCU board connected to the target system using the 40-wire

normal-pitch cable. Table 4.7 lists the connector signal assignments of the 40-wire normal-pitch

cable. Figure 4.8 shows the pin layout of the 40-wire normal-pitch cable.

Figure 4.7 Connection to the target system using dual-in-line pins

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Pas de commentaire

Renesas MCU Board for PC4504 Emulator System M34570T-MCU Informations techniques Page 21