
Mitsubishi microcomputer
M16C / 62A Grou
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTE
Protect
2-1
2.1.3 Precaution for Protect
(1) The write-enable bit of port 9 direction register and
SI/Oi control register (i=3,4)
goes to “0”
when the next write instruction is executed after write-enabled state is readied. Make
changes in input/output and
SI/Oi control register (i=3,4)
immediately after the instruction that
sets “1” in the write-enable bit of port P9 direction register and
SI/Oi control register
(i=3,4)
(avoid causing an interrupt). Also take measures to prevent DMA transfer from being
executed.
Commentaires sur ces manuels