Renesas Single-Chip Microcomputer M37900T2-RPD-E Informations techniques télécharger pdf (Page 22)

( 20 / 52 )

Chapter 3. Setting Up

To use this emulation pod with your application system, it is necessary to set as follows. Set the

following after removing the upper cover.

3.1 Selecting Clock Supply

There are two ways to supply a clock to the MCU, using the oscillator circuit of the emulation pod

or using the oscillator circuit on the target system. Table 3.1 lists the factory-settings of each clock

supply.

Table 3.1 Clock supply to the MCU

IMPORTANT

Note on Changing the Clock Supply:

• The clock supply can be set by the Init dialog box when starting up the emulator

debugger or inputting CLK command on the script window.

Clock Description Display of emulator debugger Factory-setting

X

IN

(J2 side)

Internal oscillator circuit of emulation pod

(OSC-3: 20 MHz)

Target system

Internal

External

Yes

-

X

CIN

(J1 side)

Internal oscillator circuit of emulation pod

(OSC-3: 32 kHz)

Target system

Internal

External

Yes

-

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 53 54

Commentaires sur ces manuels

Pas de commentaire