Renesas Single-Chip Microcomputer SH7203 Informations techniques

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

Chapter 5. Building the Tutorial Project The tutorial project build settings have been pre-configured in the toolchain options. To view the tool cha

5.2. Connecting the debugger For this tutorial connect an external power supply to the board, taking care to ensure the correct polarity and voltage

• Select ‘Enable’ for ‘Loading and Erasing flash memory’ • Browse and select the ‘fmtool.mot’ file in your workspace. • Click <OK> 10

Chapter 6. Downloading and Running the Tutorial Now the code has been built in HEW it needs to be downloaded to the RSK. Now that you are connected

• Press ‘Step In’ on the Debug Tool Bar. The code window will open ‘main.c’ and show the new position of the program counter. Support for the LCD

There are several versions of the timer function depending upon the peripherals available in the device. The default function is TimerADC which we sh

A dialog will open showing the variable and allowing further details to be explored. • Press ‘Add’ The dialog will close and a new pane will open in

Chapter 7. Project Files 7.1. Standard Project Files The RSK tutorials are configured so that it is possible to provide the same tutorial code on m

After initialisation the ‘main’ function is called. The call to ‘main()’ will start the main demonstration code. 7.1.2. External bus and Memory con

7.1.3. Board initialisation code (hwsetup.c/hwsetup.h) Further hardware initialisation should be performed in this function. For debug purposes, the

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

Chapter 8. Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW manual available on the CD o

Renesas Starter Kit+ for SH7203 Tutorial Manual Publication Date Rev.2.00 17 Jan 2008 Published by: Renesas Techno

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit+ for SH7203REG10J0061-0200Tutorial Manual

Renesas Starter Kit+ for SH7203Tutorial ManualUser’s ManualRev.2.00 2008.01RENESAS SINGLE-CHIP MICROCOMPUTERSuperH RISC Engine

Table of Contents Chapter 1. Preface...

Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. No one is permitted t

Chapter 2. Introduction This manual is designed to answer, in tutorial form, the most common questions asked about using a Renesas Starter Kit (RSK)

Chapter 3. Tutorial Project Workspace The workspace includes all of the files for two build configurations. The tutorial code is common to both the

Chapter 4. Project Workspace 4.1. Introduction HEW is an integrated development tool that allows the user to write, compile, program and debug a sof

The next dialog presents the example projects available. Choose the Tutorial code which will be explained later in this manual. There is also an opti