Renesas FP-144L Informations techniques télécharger pdf (Page 36)

Section 6 Restrictions

There are the following restrictions on emulation of the H8SX/1663 group when the user system

interface board is connected to the emulator.

1. The USB clock frequency is fixed to 48 MHz regardless of the EXTAL input.

2. P14 cannot be used as a port if the serial output function has already been selected. The port

pin state cannot be read from the port register.

3. The user system interface board does not support subclock operation. Thus the following

function and register cannot be used:

- 32k timer

- Subclock control register (SUBCKCR) of the clock pulse generator

- Interrupt priority register D (IPRD2 to IPRD0)

4. Exception processing of sleep instructions is not supported. Even if the SLPIE bit of the

standby control register (SBYCR) is set to 1, the emulator enters the power-down mode and no

exception processing of sleep instructions occurs.

1 2 ... 31 32 33 34 35 36 37 38 39

Pas de commentaire

Renesas FP-144L Informations techniques Page 36