Renesas H8S/2643 Series Manuel d'utilisateur télécharger pdf (Page 12)

Fasten the user system interface cable head to the IC socket for a FP-144 package on the user system

with the four screws (M2

x 10 mm) provided. Each screw should be tightened a little at a time,

alternating between screws on opposing corners. Take special care, such as manually securing the

IC socket soldered area, to prevent the soldered IC socket from being damaged by overtightening

the screws or twisting the components.

User system

Pin 1

Cable head

IC socket

(NQPACK144SD

manufactured by

Tokyo Eletech Corporation)

Screws (M2 x 10mm)

Figure 4 Connecting User System Interface Cable to User System

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Renesas H8S/2643 Series Manuel d'utilisateur Page 12