Renesas PC7501 Manuel d'utilisateur télécharger pdf (Page 11)

11 / 46

IMPORTANT

Note for LPT Parallel Interface:

• With the LPT parallel interface of the PC7501, not all host machines will work and

are guaranteed. According to the specifications and settings of the host machine,

some operation modes of the LPT parallel port cannot be used.

Notes for USB Interface:

• USB interface can not be used with a host machine running Windows 95 or Windows

NT 4.0.

• With the USB interface of the PC7501, not all hardware (such as host machine, USB

devices, USB hub) combinations will work and are guaranteed.

Note for LAN Interface:

• With the LAN interface of the PC7501, not all hardware (such as host machine,

network devices) combinations will work and are guaranteed.

Note for Using Memory Expansion and Microprocessor Modes:

• When using this emulator in memory expansion mode or microprocessor mode,

make sure that RDY* and HOLD* pins are all inactive. Otherwise, the PC7501 can not

startup properly.

Note for Clock:

• When the CLOCK LED does not turn on, check the following conditions:

(1) Immediately after starting up the emulator PC7501

Make sure that the oscillation circuit in the emulator is oscillating normally.

(2) Immediately after starting up the emulator debugger (when the setting in the Init

dialog box has been done)

Make sure that the oscillator that has been specified in the Init dialog box is working

normally.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 45 46

Pas de commentaire

Renesas PC7501 Manuel d'utilisateur Page 11