Renesas Emulation Pod M3062PT3-RPD-E Informations techniques télécharger pdf (Page 41)

( 39 / 76 )

3.7 Connecting the PC4701

To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included

with this product package. Connect the PC4701 side connector of FLX120-RPD to the cable

connector of the PC4701, then secure the FLX120-RPD with screws.

(1) Connecting the Cable to the PC4701

Figure 3.10 shows how to connect the PC4701 and FLX120-RPD

Figure 3.10 Connecting the Cable to the PC4701

CAUTION

Note on Connecting the Cable:

•Always shut OFF power before connecting the cable. Otherwise, the internal circuits

may be damaged.

• To connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side

connector horizontally with the "UPSIDE" facing up.

IMPORTANT

Note on Securing the Screws:

• After connecting the cable to the emulator main unit PC4701, be sure to secure the

screws mounted in both sides of the connector.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 77 78

Pas de commentaire

Renesas Emulation Pod M3062PT3-RPD-E Informations techniques Page 41