Renesas Emulator Debugger M16C PC4701 Manuel d'utilisateur télécharger pdf (Page 32)

( 32 / 52 )

Chapter 4. Usage

4.1 Turning On the Power Supply

(1) Checking the Connection of the Emulator System

Before turning the power ON, check the connection of the host machine, PC4701, emulation pod,

converter board and target system.

(2) Turning On the Power Supply

Power ON/OFF the target system and the PC4701 as simultaneously as possible.

CAUTION

Notes on Power Supply:

•The emulator's pin VCC is connected to the target system in order to monitor target

system voltage. For this reason, the emulator cannot supply power to the target

system. Therefore, provide the target system with a separate power supply from that

of the emulator.

• Keep target system power supply voltage within the MCU's specified range (2.7 to

5.5 V).

• Do not change target system power supply voltage after power has been activated.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Pas de commentaire

Renesas Emulator Debugger M16C PC4701 Manuel d'utilisateur Page 32