Renesas FLASH Development Toolkit 3.07 Manuel d'utilisateur télécharger pdf (Page 17)

CellCom/FreeSpeak Firmware Update Procedures

Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 17 of 49

Kirk Module

RM5 Module

3.2.3 “Flash Downloader” for Antenna DECT updates

1) Install the DECT loader onto a PC with a serial port.

2) Connect the PC to the Antenna using the Beltpack registration cable.

3) Start up the Flashloader program, set as follows with the correct DECT



4) Power up the Antenna select start. The DECT should start updating; the



5) The ildr_425.hex can be found in the DECT images directory.

6) 

application on your PC. Having previously saved the correct settings and the

antenna is connected and power up.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 48 49

Pas de commentaire

Renesas FLASH Development Toolkit 3.07 Manuel d'utilisateur Page 17