Renesas FP-80Q Informations techniques télécharger pdf (Page 20)

Fasten the user system interface cable head to the IC socket for an FP-80Q package on the user

system with the four screws (M2 x 12 mm; with four flat washers) provided. Each screw should be

tightened a little at a time, alternating between screws on opposing corners. Take special care, such

as manually securing the IC socket soldered area, to prevent the soldered IC socket from being

damaged by overtightening the screws or twisting the components.

Pin 1

Cable head

IC socket

(IC149-080-017-B5

manufactured by

YAMAICHI ELECTRONICS Co., Ltd.)

Screws (M2 x 12 mm)

with flat washers

User system

Figure 3 Connecting User System Interface Cable to User System

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Pas de commentaire

Renesas FP-80Q Informations techniques Page 20