Renesas H8S/2338 Series Manuel d'utilisateur télécharger pdf (Page 3)

Simulator for H8/300, H8/300H and H8S 3 Quick Start of the Simulator

Quick Start of the Simulator

Starting up the simulator is done as follows:

1. Select the device prompt for the ICD Debugger and reset the system.

The device prompt B:: is normally already selected in the command line. If this is not the case, enter

B:: to set the correct device prompt. The RESet command is only necessary if you do not start

directly after booting the TRACE32 development tool.

2. Specify the CPU specific settings.

The default values of all other option are set in such a way that it should be possible to work without

modification. Please consider that this is probably not the best configuration for your target.

B::

RESet

SYStem.CPU <cpu_name>

1 2 3 4 5 6 7 8 ... 21 22

Pas de commentaire

Renesas H8S/2338 Series Manuel d'utilisateur Page 3