Renesas H8S/2338 Series Manuel d'utilisateur télécharger pdf (Page 8)

Simulator for H8/300, H8/300H and H8S 8 Specific SYStem Commands

Specific SYStem Commands

SYStem.CONFIG Configure debugger according to target topology

The SYStem.CONFIG commands have no effect on the simulator. They are only provided to allow the user

to run PRACTICE scripts written for the debugger within the simulator without modifications.

SYStem.CPU CPU type

Selects the processor type. The ROM monitor software requires also a modification in the configuration table

for different processor types.

SYStem.CpuAccess Run-time memory access (intrusive)

Default: Denied.

Format: SYStem.CPU <type>

<mode>: H83001 | H83002 …

Format: SYStem.CpuAccess Enable | Denied | Nonstop

Enable Allow intrusive run-time memory access.

Since a non-intrusive run-time memory access (SYStem.MemoryAccess CPU)

is available for all TRACE32 instruction set simulators, there is no need for an

intrusive run-time memory access.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Pas de commentaire

Renesas H8S/2338 Series Manuel d'utilisateur Page 8