Renesas HS6400FDIW3S Manuel d'utilisateur télécharger pdf (Page 37)

3.3.7 FDM Pin Settings

[Only if the FDM is selected] Select the ‘Operating Mode’ and ‘Clock Mode’ and if ‘User Defined’,

set the FDM pin settings. [For ‘Boot Mode’ projects set the ‘Boot Mode Outputs’ and the ‘Boot Mode

Setting’ for the required mode, for ‘User Mode’ projects set the ‘User Mode Outputs’, ‘User Mode

Setting’ and the ‘User Program Mode Setting’ for the required mode.] Click the ‘Next’ button to

continue. “*Mode Outputs” sets which pins are driven by the FDM, “*Mode Setting” sets whether

output pins are driven High (checked) or Low (Unchecked).

Notes: Setting the mode pins using the FDM requires caution. Please confirm the pin settings with

the hardware manual even if a default setting is available. Note that in some devices, changing the

mode pin setting changes the maximum supply voltage.

Figure 3-8 FDM Pin Settings

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 93 94

Pas de commentaire

Renesas HS6400FDIW3S Manuel d'utilisateur Page 37