Renesas HS6400FDIW3S Manuel d'utilisateur télécharger pdf (Page 50)

3.10 Reading the FLASH ROM Data

1. Display the ‘Upload Image’ dialog box from [

Device -> Upload Image…

2. Enter the start and end addresses, or the start address and length.

3. Click the ‘Upload’ button to start reading.

4. When ‘Upload operation complete’ is displayed in the output window and the uploaded data is

displayed in the hex editor, reading is complete.

If the user specifies an Absolute image, the uploaded data will be placed in an image the size of the

FLASH memory at the same address it was uploaded from. Use an Absolute Image if the uploaded data

needs to be added to the project. It is not possible to upload a region outside of the FLASH into an

Absolute Image.

Note

When FDT is started in boot mode, the flash memory data has normally already been erased.

Figure 3-20 Upload Image Dialog

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 93 94

Pas de commentaire

Renesas HS6400FDIW3S Manuel d'utilisateur Page 50