Renesas SH7210 Series Manuel d'utilisateur télécharger pdf (Page 60)

Usage Example of Sequential Break Extension Setting: A tutorial program provided for the

product is used as an example. For the tutorial program, refer to section 6, Tutorial, in the SH-2A,

SH-2 E200F Emulator User’s Manual.

The conditions of Event Condition are set as follows:

1. Ch1

Breaks address H’00001086 when the condition [Prefetch address break after executing] is

satisfied.

2. Ch2

Breaks address H’00001068 when the condition [Prefetch address break after executing] is

satisfied.

3. Ch3

Breaks address H’00001058 when the condition [Prefetch address break after executing] is

satisfied.

Note: Do not set other channels.

4. Sets the contents of the [Ch1,2,3] list box to [Break: Ch 3-2-1] in the [Combination action]

dialog box.

Then, set the program counter and stack pointer (PC = H’00000800, R15 = H’FFF9F000) in the

[Registers] window and click the [Go] button. If this does not execute normally, issue a reset and

execute the above procedures.

The program is executed up to the condition of Ch1 and halted. Here, the condition is satisfied in

the order of Ch3 -> 2 -> 1.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 89 90

Pas de commentaire

Renesas SH7210 Series Manuel d'utilisateur Page 60