Renesas User System Interface Board HS7047ECH61H Manuel d'utilisateur télécharger pdf (Page 21)

Section 1 Overview

1.1 Notes on Usage

CAUTION

READ the following warnings before using the emulator product.

Incorrect operation will damage the user system and the emulator

product. The USER PROGRAM will be LOST.

1. Check all components with the component list after unpacking the emulator.

2. Never place heavy objects on the casing.

3. Observe the following conditions in the area where the emulator is to be used:

• Make sure that the internal cooling fans on the sides of the emulator must be at least 20 cm (8") away

from walls or other equipment.

• Keep out of direct sunlight or heat. Refer to section 3.1, Environmental Conditions.

• Use in an environment with constant temperature and humidity.

• Protect the emulator from dust.

• Avoid subjecting the emulator to excessive vibration. Refer to section 3.1, Environmental Conditions.

4. Protect the emulator from excessive impacts and stresses.

5. Before using the emulator's power supply, check its specifications such as power voltage and frequency.

6. When moving the emulator, take care not to vibrate or otherwise damage it.

7. After connecting the cable, check that it is connected correctly. For details, refer to section 2, Preparation

before Use.

8. Supply power to the emulator and connected parts after connecting all cables. Cables must not be connected

or removed while the power is on.

9. For details on differences between the target MCU and the emulator, refer to section 3.5, Support of the

Target MCU.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 242 243

Pas de commentaire

Renesas User System Interface Board HS7047ECH61H Manuel d'utilisateur Page 21