Renesas User System Interface Board HS7047ECH61H Manuel d'utilisateur télécharger pdf (Page 54)

Connection Using the HS7144ECH61H

WARNING

Always switch OFF the emulator and user system before

connecting or disconnecting any CABLES.

Failure to do so will result in a FIRE HAZARD, and will damage

the user system or emulator or result in PERSONAL INJURY.

Also, the USER PROGRAM will be LOST.

Notes: 1. For more details on the HS7144ECH61H, refer to the user’s manual supplied with the emulator.

2. This user system interface board can only be used in combination with the specified QFP socket

(IC149-112C15333-0B).

Install the FP-112B IC socket (IC149-112C15333-0B manufactured by YAMAICHI ELECTRONICS Co.,

LTD.) on the user system to connect the emulator. Since the pin arrangement is the same as that of the actual

MCU, refer to the hardware manual.

Figure 3.15 shows the connection of the HS7144ECH61H, figure 3.16 shows the size restrictions for the

installed components of the HS7144ECH61H, and figure 3.17 shows the recommended mount pad dimensions

of the user system IC socket.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 242 243

Pas de commentaire

Renesas User System Interface Board HS7047ECH61H Manuel d'utilisateur Page 54