Renesas R8C/Tiny Series Manuel télécharger pdf (Page 48)

R8C/10 Group

Rev.1.20 Jan 27, 2006 page 38 of 180

REJ09B0019-0120

10.1.5 Interrupt Control

The following describes how to enable/disable the maskable interrupts, and how to set the priority in

which order they are accepted. What is explained here does not apply to nonmaskable interrupts.

Use the FLG register’s I flag, IPL, and each interrupt control register's ILVL2 to ILVL0 bits to enable/

disable the maskable interrupts. Whether an interrupt is requested is indicated by the IR bit in each

interrupt control register.

Figure 10.3 shows the interrupt control registers.

10.1 Interrupt Overview

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 198 199

Pas de commentaire

Renesas R8C/Tiny Series Manuel Page 48